Hi Everyone
I have a problem with Cisco Router 2801, An issue with PVDM2-32 its not detected by the router,
I tired two units (PVDM2-32) on different two routers but its still the same, is there any issue or conflict with the IOS or Configuration?
PVDM Slot 0:
No Card PVDM daughter card
EEPROM format version 255
EEPROM contents (hex):
0x00: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x10: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
PVDM Slot 1:
No Card PVDM daughter card
EEPROM format version 255
EEPROM contents (hex):
0x00: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x10: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
-----
Cisco IOS Software, 2801 Software (C2801-IPVOICEK9-M), Version 12.4(25a), RELEAS
E SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 22-May-09 22:44 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T5, RELEASE SOFTWARE (fc1)
--------- uptime is 15 minutes
System returned to ROM by power-on
System image file is "flash:/c2801-ipvoicek9-mz.124-25a.bin"
Thanks in advance
Regards,
Remon Nader
it.rnader@gmail.com
