Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Issue with Rechability for CUCM on VMWARE

I am setting Voice lab at home. I was able to install the CUCM correctly and Can reach  CUCM Webpage from my PC. Following are the Setting

PC Network Adaptor IP: 192.168.10.102/24
Default Gateway: 192.168.10.1 ( is my Router connecitng to internet)

Loopback Adapter is used for connecting VM machine and Router on GNS which provides NTP
Loopback Adapter IP : 192.168.32.253/24 Default Gateway : 192.168.32.254
Router IP Address : 192.168.32.254 which is connected to Loopback Adapter Interface
CUCM IP : 192.168.32.1 Defailt Gateway: 192.168.32.254  NTP : 192.168.32.254

I can use CUCM from my PC and works perfect. CIPC phone installed on my PC works and can register.

Now, I want my other PC which is having IP adddress 192.168.10.104, Default Gateway 192.168.10.1 should reach to CUCM and vice versa.
I tried lot of option like Network bridging etc, but all failed. Can you guide me to do the required changes??

3 REPLIES

Issue with Rechability for CUCM on VMWARE

Hi Rahul.

How is the second PC connected to the CUCM?

Can you ping CUCM from the second PC?

Let me know

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
New Member

Re: Issue with Rechability for CUCM on VMWARE

Other PC is connected to Router 192.168.10.1

      

CUCM cannot ping router 192.168.10.1 or 10.104

Issue with Rechability for CUCM on VMWARE

Hi

How is VM Network configured? (Bridged/Nat)

Verify it and set to bridged mod if different.

Remember that loopback interface is a virtual interface and does NOT provide broadcast L2 traffic only layer3 so it doesn't respond to ARP request.

Does CUCM ping its default gw?

HTH

Regards

Carlo

Please rate all helpful posts

"The more you help the more you learn"

Please rate all helpful posts "The more you help the more you learn"
139
Views
0
Helpful
3
Replies
CreatePlease to create content