I am having an issue where when a user trys to pickup a line on the phone it hangs for a bit then the call is answered. Also when a call is transfered to another line the same thing happens to the person doing the transfer. It doesn't happen all the time and it seems to move around to different phones. I have checked all my switches and none are reporting any major errors. I did get a message that my Call Processor was pegging but its not doing it now. The Real time monitoring tool shows nothing with the Call managers either.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...