I probably should have left this one for Paolo but he has been very busy lately :)
Cisco Unified CME provides internal localization support for 12 languages including English and 16 countries including the United States. User locales specify the language to use for text displays; network locales specify country-specific tones and cadences. View the list of system-defined locales and their two-letter codes by typing ? after the user-locale and network-locale commands in telephony-service configuration mode.
For the Cisco Unified IP Phone 7912, 7940, and 7960, the system-defined user locales and network locales are preloaded into Cisco IOS software.
For the Cisco Unified IP Phone 7911, 7941, 7961, 7970, and 7971, you must download locale files to support the system-defined locales and store the files in slot 0, flash memory, or on an external TFTP server.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...