voice service voip ip address trusted list ipv4 0.0.0.0 ipv4 0.0.0.0 0.0.0.0 allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service h450.7 no supplementary-service sip moved-temporarily no supplementary-service sip refer fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip bind control source-interface GigabitEthernet0/1.5 bind media source-interface GigabitEthernet0/1.5 registrar server early-offer forced
On the CUCM Side:
Media Termination Point (checked) Disable Early Media on 180 (unchecked) Require SDP Inactive Exchange for Mid-Call Media Change(checked) Early Offer support for voice and video calls (checked) Send send-receive SDP in mid-call INVITE(checked)
The result of "debug ccsip messages" and "debug dialpeer voice inout" is:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...