09-25-2013 09:10 AM - edited 03-16-2019 07:32 PM
Hey Guys,
I have a customer who uses 9 to call out and they will be using jabber mainly to dial out of outlook. But all the numbers in
the contact is save without 9, how can i go about with this.
IM & Presence 9.1.1.20000-5 and Jabber 9.2.4
CUCM: 9.1.1.20000-5
Please rate the post
Shibly Ibrahim
Solved! Go to Solution.
09-25-2013 09:47 AM
09-25-2013 11:29 AM
Hello Mohamed
I hope this finds you well
Please find the below URL which i hope help you:-
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_01.htmlhttp://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_01.html
Thank you
Please rate all useful information
09-25-2013 03:08 PM
Mohammed,
I echo Chris's words here, application dial rules is the way to go.
NB: you dont need to install the cop files as we used to do for previous versions of CUCM.
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-26-2013 05:20 AM
You will need to use translation pattern for that...
pattern : \+.!
discard digits: predot
prefix digits outoing calls: 900
That will strip the + and prefix 900
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-25-2013 09:47 AM
Add applicaton dial rules in CUCM for this purpose.
HTH,
Chris
09-26-2013 05:13 AM
Thanks Guys. It works.
One more thing They have save some international numbers with + and the number of digits can vary.
How do i get that off and replace + with 00 so that it will take the application dialing rule i have made to call.
Its the number of digits i am concerned and the digit to remove
Please rate the post
Shibly Ibrahim
09-25-2013 11:29 AM
Hello Mohamed
I hope this finds you well
Please find the below URL which i hope help you:-
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_01.htmlhttp://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_01.html
Thank you
Please rate all useful information
09-25-2013 03:08 PM
Mohammed,
I echo Chris's words here, application dial rules is the way to go.
NB: you dont need to install the cop files as we used to do for previous versions of CUCM.
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-26-2013 05:20 AM
You will need to use translation pattern for that...
pattern : \+.!
discard digits: predot
prefix digits outoing calls: 900
That will strip the + and prefix 900
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"
09-26-2013 05:24 AM
Thanks Guys. I tried a translation rule earlier quite similar dont know what i was doing wrong. but yours worked perfectly
Thanks
Please rate the post
Shibly Ibrahim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide