I was wondering if there was something special reqiured to register mobile Jabber clients to the CUCMBE 3K, all the Doco I have read thus far seems to indicate that it is supported so I thought I would give it a shot as I have a spare enhanced user license. I have uploaded the cop.sgn for andoid jabber, not sure if that was required but seemed to intall without any issues.
When registering it just tells me to check my settings. (Extremely usefull error message)
Device ID is set to CSFTEST when configuring the phone
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...