Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Jabber for iphone looking for CTLFile.tlv & SEPC42C0391C5C2.cnf.xml

Hi all,

I am trying to get jabber version 9.1 to register with CME 8.6.  When I do a debug tftp events i get the following 2 errors TFTP Looking for CTLFile & TFTP Looking for SEPC42C0391C5C2.cnf.xml

Is there any way to manualy create the .cnf.XML file ? I have very little knowledge of CME as I have only just started studying for the CCNA Voice.

Any help would be much appreciated. I will include the config below and hope someone can point us in the right direction

I am currently running c3825-ipvoicek9-mz.151-3.t4.bin

voice service voip

ip address trusted list

  ipv4 172.16.10.0 255.255.255.0

  ipv4 192.168.10.0 255.255.255.0

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

sip

  bind control source-interface GigabitEthernet0/0

  bind media source-interface GigabitEthernet0/0

  registrar server

!

!

voice register global

mode cme

source-address 192.168.10.200 port 5060

max-dn 20

max-pool 20

load 7971 term71.default

authenticate register

authenticate realm ************

tftp-path flash:

file text

create profile sync 0001141734766925

!

voice register dn  3

number 2000

name shaun-iphone 2000

label shaun-iphone 2000

!

voice register pool  1

id mac C42C.0391.C5D2

session-transport tcp

number 1 dn 3

dtmf-relay rtp-nte

username shaun password 1nsp1rat1on1

codec g711alaw

Thanks Shaun

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Jabber for iphone looking for CTLFile.tlv & SEPC42C0391C5C2.cnf.

Hi Shaun,

In voice register pool insert type for phone, example below, after change no create profile, create profile and reset phones.

voice register pool  1

registration-timer max 720 min 660

id mac C09F.

session-transport tcp

type CiscoMobile-iOS

number 1 dn 1

dtmf-relay rtp-nte

codec g711ulaw

J Rosa

2 REPLIES
New Member

Jabber for iphone looking for CTLFile.tlv & SEPC42C0391C5C2.cnf.

Hi Shaun,

In voice register pool insert type for phone, example below, after change no create profile, create profile and reset phones.

voice register pool  1

registration-timer max 720 min 660

id mac C09F.

session-transport tcp

type CiscoMobile-iOS

number 1 dn 1

dtmf-relay rtp-nte

codec g711ulaw

J Rosa

New Member

Jabber for iphone looking for CTLFile.tlv & SEPC42C0391C5C2.cnf.

Thanks J Rosa,

I realised after posting that I was running CME 8.5 and CME 8.6 is required ( I hadn't got the option type CiscoMobile-iOS) available under the voice register pool 1. I also was unable to issue the registration-timer max 720 min 660 command.

After upgrading to CME 8.6 and issuing the no create profile and then create profile I still got the error messages, this was even after powering off the iphone for 30 seconds and then powering back on.

End solution was to uninstall the Jabber app on the iphone and reinstall, issue no create profile & then create profile as J Rosa said and all now works like a charm.

Thanks, well happy

345
Views
0
Helpful
2
Replies
CreatePlease to create content