Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

L3 Switches - issues with Service-Policies

Hi, need some help please;

I have a VOIP setup on two L3 switches:

WS-C3560G-48TS-S; (C3560-IPSERVICES-M), Version 12.2(25)SEB4

WS-C3550-48-EMI; (C3550-I5Q3L2-M), Version 12.1(22)EA1a

These switches have Data & Voice vlans configured, I need to apply tag traffic on some interfaces , but the commands are not accepted/supported on these switches:..

eg..

interface GigabitEthernet0/47

service-policy output Shape

eg..

interface Vlan300

service-policy input DCOS-Classify

!

policy-map DCOS-Classify

class Classify-Multimedia-Data

set ip dscp ef

class Classify-Multimedia-Signalling

set ip dscp af41

class Classify-Interactive

set ip dscp af31

class class-default

set ip dscp af11

policy-map QoS-Policy

class Multimedia

priority percent 25

class Interactive

bandwidth remaining percent 75

class DataTransfer

bandwidth remaining percent 25

policy-map Shape

class class-default

shape average 750000 7500

service-policy QoS-Policy

!

  • IP Telephony
1 REPLY
Anonymous
N/A

Re: L3 Switches - issues with Service-Policies

tag switching have a data plane that forwards packets based on fixed length labels. They also have a control plane that deals with label assignment and distribution between the devices based on the Forward Equivalence Class (FEC). An FEC is a category to which a packet belongs to, depending on some defined criteria

You can refer this guide for more info on tag switching

http://www.cisco.com/en/US/docs/ios/12_0/switch/configuration/guide/xctagc.html

106
Views
0
Helpful
1
Replies