cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
232
Views
0
Helpful
1
Replies

lack of conectivity with subinterface of voice VLAN

I have a CME flash:c3825-adventerprisek9-mz.124-22.T.bin" with SIP linksys phone

the CME was working fine but today suddenly the user can not make internal or calls to PSTN. I notice that I can not ping to the phones I need to shutdown the subinterface 0.200 voice VLAN and then not shutdown, but after some minutes 5 or 6 the problems comes back.

what it could be the reason ?? how can I solved this issue??

interface GigabitEthernet0/0

no ip address

duplex auto

speed auto

media-type rj45

!

interface GigabitEthernet0/0.1

encapsulation dot1Q 1 native

ip address 172.16.0.1 255.255.255.0

ip nat inside

ip virtual-reassembly

!

interface GigabitEthernet0/0.200

encapsulation dot1Q 200

ip address 192.168.0.1 255.255.255.0

h323-gateway voip bind srcaddr 192.168.0.1

!

interface GigabitEthernet0/1

ip address 201.x.x.x 255.255.255.248

ip nat outside

ip virtual-reassembly

duplex auto

speed auto

regards,

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi, watch out doing blind upgrades to the latest IOS, these can be extremely buggy.

I've seen cases where after the upgrade nothing works and you have to go back very quickly.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: