Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Last Disconnect Text is "destination out of order (27)"

This voip peer is not working..

dial-peer voice 7204 voip

tone ringback alert-no-PI

description PTLS_ATL

destination-pattern 7204....

progress_ind alert enable 8

progress_ind progress enable 8

progress_ind connect enable 8

session target ipv4:10.60.200.25

What would cause that disconnect text?

4 REPLIES
Hall of Fame Super Gold

Re: Last Disconnect Text is "destination out of order (27)"

take a trace on 10.60.200.25 to find out.

Anonymous
N/A

Re: Last Disconnect Text is "destination out of order (27)"

Cisco Employee

Re: Last Disconnect Text is "destination out of order (27)"

Destination is out of order. The number dialed is a working number, but the span is not active.

at least that's for a PSTN call

when coming from VOiP it's almost the same as disconnect cause 3

No route to the destination. The dialed number is in the routing plan, but there is no physical route to the destination. The most likely cause of this is that the PRI D-channel is down, or the span or WAN is not connected correctly.

I've seen this when having 2 servers one froze and got unresponsive and there is no a higher higher preference dial peer to other server

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Anonymous
N/A

Re: Last Disconnect Text is "destination out of order (27)"

3056
Views
0
Helpful
4
Replies