I have a CUCM v9.1 with an issue for access to the ccmuser web page using the AD Credentials, I've configured the LDAP Auth in the CUCM with no error messages and also the web access for my users like this:
One commone one is that CUCM treats the username field as case sensitive. Does it have any upper case characters? You can see this within /ccmadmin under End User Configuration.
If that's not it, either a Wireshark of the LDAP bind or a stare/compare between your sync agreement and the auth config to see why one can get the user object but the other cannot bind as that person.
If I need to troubleshoot the LDAP sync/auth, I will leverage either Apache Directory Studio or Softerra LDAP Browser to verify parameters. Both of these tools are free and fairly robust. You should be able to talk to the DC or DC/GC server from the data access networks.
Anyway, I verify the configurations that are supposed to be used by CUCM from the LDAP client (Apache or Softerra). Once verified then I will test again from UCM. If you still have an issue then you may have a security layer issue.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...