Recently we have started getting this error on our call manager directly related to one domain controller. I was wondering if anyone has seen this error and if they were able to resolve it. The last time we saw this error the DC had to be rebuilt to make the call manager happy about binding to it. To further confuse this we can bind to AD using LDP.exe using the same credentials that the call manager is using. Also binding to a different DC works without a hitch.
Thanks in advance.
Call manager: 184.108.40.20600-13
Microsoft Active Directory 2008R2 Native Mode
Error while Connecting to ldap://uspdxdc10.internal.net:389/DC=internal,DC=net, javax.naming.NamingException: [LDAP: error code 1 - 000004DC: LdapErr: DSID-0C0906DC, comment: In order to perform this operation a successful bind must be completed on the connection., data 0, v1db0]; remaining name \'DC=internal,DC=net\'
Rate helpful posts
Blog - http://tripplehelix.net
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...