Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

licence call manager 6.1 cluster

hi,

i need to install 2 mcs 7816 in cluster.

the customer have pourchased 2 Lic-CM6.1-7816. and one LIC-CM-DL-100

i know that the publisher acts as manager licence,

shoud i use 2 Lic-CM6.1-7816 with to address MAC or just one licence with mac's publisher.

shoud i need one LIC-CM-DL-100 that covers my phones or ech server need its LIC-CM-DL-100.

thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: licence call manager 6.1 cluster

If it's new, you should have a PAK key. Enter in the PAK key and it should should show you (2) nodes for CUCM 7916 and the 100 DLUs. You can check these out all at one time. If you PAK keys for example:

(1) Node

(1) Node

(1) DLU 100

Check each out and when then ask for the MAC, put in NIC1 of the publisher.

When the files are emailed, use the CUCM admin page to upload the files and it should work then.

4 REPLIES

Re: licence call manager 6.1 cluster

Everything should be licensed to the NIC1 on the Publisher. When you add the Subscriber, it will get the license information from the Publisher.

Community Member

Re: licence call manager 6.1 cluster

that is mean i generate :

- 2 licence files for 2 nodes where i use the mac of the first node.

- one licence file for phones

it's right, please confirm

thanks

Re: licence call manager 6.1 cluster

If it's new, you should have a PAK key. Enter in the PAK key and it should should show you (2) nodes for CUCM 7916 and the 100 DLUs. You can check these out all at one time. If you PAK keys for example:

(1) Node

(1) Node

(1) DLU 100

Check each out and when then ask for the MAC, put in NIC1 of the publisher.

When the files are emailed, use the CUCM admin page to upload the files and it should work then.

Community Member

Re: licence call manager 6.1 cluster

thank you for your assistance

185
Views
0
Helpful
4
Replies
CreatePlease to create content