Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

License 4.2 to 6.1

We upgraded 4.2 to 6.1 and received the appropriate lic from TAC, uploaded, then rebooted the server. However if run a license unit report I get 0 under authorized devices and have a negative number in my units reaming field.......any ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: License 4.2 to 6.1

Hi Ben,

I was just working with Ronny who had this exact issue with licensing.This is the process he used to rectify this problem. Run the Device License Unit Calculator, then send the results to Cisco Licensing requesting the proper DLU License;

Send an email to;

licensing@cisco.com

With this;

*Subject - Upgrade from 4.2(3) DLU License File Required

Company Name

Company Address

Company Phone

Contact Name

MAC Address of Pub/First Node

Please find attached the output from our DLU License Calculator:

Here is an example *** of course yours will be different;

CTI Port 0 40 0

Cisco 12 S 2 1 2

Cisco 7902 1 1 1

Cisco 7905 2 9 18

Cisco 7920 4 1 4

Cisco 7935 3 1 3

Cisco 7940 4 10 40

Cisco 7960 4 1 4

Cisco 7970 5 1 5

Cisco ATA 186 1 4 4

Cisco IP Communicator 3 1 3

Can you please forward the license file as soon as possible.

Here is the thread;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddfc395/11#selected_message

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: License 4.2 to 6.1

Hi Ben,

I was just working with Ronny who had this exact issue with licensing.This is the process he used to rectify this problem. Run the Device License Unit Calculator, then send the results to Cisco Licensing requesting the proper DLU License;

Send an email to;

licensing@cisco.com

With this;

*Subject - Upgrade from 4.2(3) DLU License File Required

Company Name

Company Address

Company Phone

Contact Name

MAC Address of Pub/First Node

Please find attached the output from our DLU License Calculator:

Here is an example *** of course yours will be different;

CTI Port 0 40 0

Cisco 12 S 2 1 2

Cisco 7902 1 1 1

Cisco 7905 2 9 18

Cisco 7920 4 1 4

Cisco 7935 3 1 3

Cisco 7940 4 10 40

Cisco 7960 4 1 4

Cisco 7970 5 1 5

Cisco ATA 186 1 4 4

Cisco IP Communicator 3 1 3

Can you please forward the license file as soon as possible.

Here is the thread;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddfc395/11#selected_message

Hope this helps!

Rob

New Member

Re: License 4.2 to 6.1

Rob,

Thank you. We were given the wrong information a first. Following your procedure we were given the correct lic file.

Thanks,

Ben

110
Views
0
Helpful
2
Replies