After much digging around Cisco website and Googling, I finally found the above link. However after shouting out Eureka~!, I slammed into a titanium-coated brick wall when I scrolled down and saw that the License (RTU) table shows N/A for both 8941s and 8945s.
Is there a way of finding out these plus other License Unit without having to install the COP file? I'm in the process of trying to get my CCO tie into an account that allows me to download these files. So in the meantime, if I could get some information from Cisco that would be most helpful in putting a recommendation report up to the business.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...