08-17-2009 02:29 AM - edited 03-15-2019 07:23 PM
Hi,
I have a license
Product = CM7.0-K9-UPG
Description = Major Release SW Upgrade to 7.0 for SASU or UCSS.
Am I able to use this license for both the CallManager 6.1(2) upgrade to CallManager 7.0 and my Unity Connection 2.0 upgrade to Unity Connection 7.0?
Regards Kim
Solved! Go to Solution.
08-17-2009 08:01 AM
Hi Kim,
That Part# is only for Communications Manager :(
You will require a new License for this upgrade. The related info is in the first link below;
Cisco Unity Connection Release 7.0
UNITYCN7-K9-UPG
Upgrading Cisco Unity Connection 2.x to the Shipping 7.x Version
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug010.html
Upgrade to Release 7.0 Requires Software DVDs
To upgrade from Cisco Unity Connection 2.x to version 7.0 or from Cisco Unified CMBE 6.x to 7.0, you must get DVDs from Cisco. For ordering information, go to the Cisco Ordering website at
http://www.cisco.com/en/US/ordering/index.shtml.
You Cannot Upgrade from Connection 2.1(3) to 7.0(1) or 7.0(2)
A change that was made to Connection in version 2.1(3) prevents upgrades from version 2.1(3) to Connection 7.0(1) or 7.0(2). To upgrade from Connection 2.1(3), you will need to wait for Connection 7.1(2) to be released, in the second quarter of 2009.
Hope this helps!
Rob
08-17-2009 08:01 AM
Hi Kim,
That Part# is only for Communications Manager :(
You will require a new License for this upgrade. The related info is in the first link below;
Cisco Unity Connection Release 7.0
UNITYCN7-K9-UPG
Upgrading Cisco Unity Connection 2.x to the Shipping 7.x Version
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug010.html
Upgrade to Release 7.0 Requires Software DVDs
To upgrade from Cisco Unity Connection 2.x to version 7.0 or from Cisco Unified CMBE 6.x to 7.0, you must get DVDs from Cisco. For ordering information, go to the Cisco Ordering website at
http://www.cisco.com/en/US/ordering/index.shtml.
You Cannot Upgrade from Connection 2.1(3) to 7.0(1) or 7.0(2)
A change that was made to Connection in version 2.1(3) prevents upgrades from version 2.1(3) to Connection 7.0(1) or 7.0(2). To upgrade from Connection 2.1(3), you will need to wait for Connection 7.1(2) to be released, in the second quarter of 2009.
Hope this helps!
Rob
08-18-2009 12:20 AM
Hi Rob,
Thanks, I will pursue the upgrade license.
Kim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide