Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Licensing

Hi,

I have a license

Product = CM7.0-K9-UPG

Description = Major Release SW Upgrade to 7.0 for SASU or UCSS.

Am I able to use this license for both the CallManager 6.1(2) upgrade to CallManager 7.0 and my Unity Connection 2.0 upgrade to Unity Connection 7.0?

Regards Kim

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Licensing

Hi Kim,

That Part# is only for Communications Manager :(

You will require a new License for this upgrade. The related info is in the first link below;

Cisco Unity Connection Release 7.0

UNITYCN7-K9-UPG

Upgrading Cisco Unity Connection 2.x to the Shipping 7.x Version

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug010.html

Upgrade to Release 7.0 Requires Software DVDs

To upgrade from Cisco Unity Connection 2.x to version 7.0 or from Cisco Unified CMBE 6.x to 7.0, you must get DVDs from Cisco. For ordering information, go to the Cisco Ordering website at

http://www.cisco.com/en/US/ordering/index.shtml.

You Cannot Upgrade from Connection 2.1(3) to 7.0(1) or 7.0(2)

A change that was made to Connection in version 2.1(3) prevents upgrades from version 2.1(3) to Connection 7.0(1) or 7.0(2). To upgrade from Connection 2.1(3), you will need to wait for Connection 7.1(2) to be released, in the second quarter of 2009.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: Licensing

Hi Kim,

That Part# is only for Communications Manager :(

You will require a new License for this upgrade. The related info is in the first link below;

Cisco Unity Connection Release 7.0

UNITYCN7-K9-UPG

Upgrading Cisco Unity Connection 2.x to the Shipping 7.x Version

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/upgrade/guide/7xcucrug010.html

Upgrade to Release 7.0 Requires Software DVDs

To upgrade from Cisco Unity Connection 2.x to version 7.0 or from Cisco Unified CMBE 6.x to 7.0, you must get DVDs from Cisco. For ordering information, go to the Cisco Ordering website at

http://www.cisco.com/en/US/ordering/index.shtml.

You Cannot Upgrade from Connection 2.1(3) to 7.0(1) or 7.0(2)

A change that was made to Connection in version 2.1(3) prevents upgrades from version 2.1(3) to Connection 7.0(1) or 7.0(2). To upgrade from Connection 2.1(3), you will need to wait for Connection 7.1(2) to be released, in the second quarter of 2009.

Hope this helps!

Rob

New Member

Re: Licensing

Hi Rob,

Thanks, I will pursue the upgrade license.

Kim

362
Views
0
Helpful
2
Replies
CreatePlease to create content