Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Limit bandwidth on cisco 2960 switch

Hi All,

I wish to limit traffic on switch port for my various customers ranging from 10mbps, 256 and 512kbps respectively

Which suitable configuration is appropriate for this

Thanks

1 REPLY
Green

Limit bandwidth on cisco 2960 switch

Hi,

On a 2960 you can not limit the ingress traffic.

Refer to the config guides

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/configuration/guide/scg_2960.html

However you can limit the egress.

Example

!

mls qos

!

interface fas 0/1

srr-queue bandwidth limit 10

!

This will limit the egress - outbound traffic to 10% of the ports speed.

So if your port is running at 100Mbps then it would only output at 10Mbps

HTH

Alex

Regards, Alex. Please rate useful posts.
1421
Views
0
Helpful
1
Replies