Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Limiting Access to 53xx/54xx

Hello,

When using the 53xx/54xx platforms to convert a TDM interface to SIP. How do you limit what IP addresses can send SIP calls to the appliance to be completed via the TDM connection?

More specifically, when you have a phone connected to a SIP Router with a route pointing to the 53xx/54xx I want to enforce that the SIP Router can create the call for the phone, but the phone cannot directly call thru the appliance.

Thanks,

Max

2 REPLIES
Silver

Re: Limiting Access to 53xx/54xx

configure the sip bind {control I media}command under voice service voip configuration mode to use the external interface with public address.

For more information about how to bind the control interface, refer to Configuring SIP Bind Features.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/callc_c/sip_c/sipc1_c/chapter7.htm

New Member

Re: Limiting Access to 53xx/54xx

Hi,

This isn't what I was looking for. I want to limit (via ACL?) what SIP devices can send traffic to the 53xx/54xx.

Thanks,

Max

94
Views
0
Helpful
2
Replies