Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Limiting number of calls on SIP Trunk

I set up a SIP trunk between CCME 3.2 (on 1841) and CCME 3.3 (on 2611XM). We've only 128 kbps of bandwidth. Use G729r8 with RTP header compression.

Does someone knows how to configure a limitation of simultaneous calls that could be handles on the trunk ?

Thanks in advance.

3 REPLIES
Hall of Fame Super Gold

Re: Limiting number of calls on SIP Trunk

Hi, this is how you do that:

dial-peer voice 100 voip

session protocol sipv2

max-conns 4

...

Seem strange that you have CCME on the 1841 that does not supports CCME ?

Hope this helps, please rate post if it does!

New Member

Re: Limiting number of calls on SIP Trunk

Hi,

Thank you.

It was very helpfull.

I have rated your post.

Yes, 1841 does CCME Version 3.2 in c1841-spservicesk9-mz.123-8.YG4.bin IOS.

Hall of Fame Super Gold

Re: Limiting number of calls on SIP Trunk

Good to know.

Thanks for the nice rating and good luck!

111
Views
10
Helpful
3
Replies