Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Linksys SPA phone auto-configure commands

Our company is using a homegrown Asterisk VoIP server solution. We use DHCP and TFTP to auto-configure Linksys SPA phones. When we

change the configuration, we would like the phones to reload the config

files. Maybe we could use multicast to force the phones to restart

and/or reload the configuration since we know that Linksys phones

respond to some multicast commands. Where can we get the list of those

multicast commands, possibly with details (packet formats, command codes)?

4 REPLIES
Hall of Fame Super Gold

Re: Linksys SPA phone auto-configure commands

Hi, if this information is not in the document called "remote provisioning guide", I don't think you can find it anywher else.

New Member

Re: Linksys SPA phone auto-configure commands

Hi,

Thanks. I will look for it.

Hall of Fame Super Gold

Re: Linksys SPA phone auto-configure commands

You are welcome. Please remember to rate useful posts with the scrollbox below.

New Member

Re: Linksys SPA phone auto-configure commands

For the record, the doc I found is entitled spa_provisioning_guide.pdf

159
Views
5
Helpful
4
Replies