Hi! I have a problem with my new ADSL Linksys WAG54GP2 and UCM 6.1
I try to register that device like SIP Basic. I added End User (with password and credential password), create new security profile (checked box "Enable Digest Authentication"), set "Digest user" list to my created earlye End User, Assigned line to phone. I configured Linksys Line 1:
SIP Prox - IP address of my UCM
Register set to "yes"
Make Call w/o register set to "no"
Display name - set line number from UCM
Username - End User from UCM
Use Auth ID - yes
Registration always failed. Linksys don't do any logs. How can I investigate, why registration failed?
I Try simple dialpeer with that Linksys and 2811 router (protocol sip) - it work excellent. Please, help!
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...