Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lisence Problems

Hi

i just bought a fl-cme-srst-5 but i dont know how i can find the PAK# so i can get my lisence with it, i just recive a package which just contain a cd with user agreement file and one printed paper that just say what i bought but with out any PAK#.

please help me with this issue

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Lisence Problems

Hi there,

In the licensing scheme, the cme-srst feature license is a "paper"

RTU (right to use) license only. There is nothing to load on the router

itself

Activating CME-SRST Feature License


The ISR-G2 comes with a 60-day evaluation license. After 60 days, the license changes to “right to use”.
The customer is required to pay for the CME-SRST feature license which is valid for 12 years.
Prerequisites
• UCK9 license
• ISR-G2 already accepts UC CLIs


SUMMARY STEPS
1. show license detail cme-srst
2. configure terminal
3. license accept end user agreement
4. exit
5. show license detail cme-srst
6. write mem


DETAILED STEPS
Command or Action Purpose


Step 1 show license detail cme-srst
Example:
Router# show license detail cme-srst
Displays the available cme-srst license. EULA should be in NOT
ACCEPTED state.


Step 2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.


Step 3 license accept end user agreement
Example:
Router(config)# license accept end user
agreement
Configures a one-time acceptance of the EULA for cme-srst
license.
Accepts EULA by typing YES.

Step 4 exit
Example:
Router(config)# exit
Exits global configuration mode.


Step 5 show license detail cme-srst
Example:
Router# show license detail cme-srs
Displays the available cme-srst license. EULA should be in
ACCEPTED state.


Step 6 write mem
Example:
Router# write mem
Saves configuration.
Command or Action

This is explained in more detail starting on Page 15;

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.pdf

Cheers!

Rob

1 REPLY
Hall of Fame Super Red

Lisence Problems

Hi there,

In the licensing scheme, the cme-srst feature license is a "paper"

RTU (right to use) license only. There is nothing to load on the router

itself

Activating CME-SRST Feature License


The ISR-G2 comes with a 60-day evaluation license. After 60 days, the license changes to “right to use”.
The customer is required to pay for the CME-SRST feature license which is valid for 12 years.
Prerequisites
• UCK9 license
• ISR-G2 already accepts UC CLIs


SUMMARY STEPS
1. show license detail cme-srst
2. configure terminal
3. license accept end user agreement
4. exit
5. show license detail cme-srst
6. write mem


DETAILED STEPS
Command or Action Purpose


Step 1 show license detail cme-srst
Example:
Router# show license detail cme-srst
Displays the available cme-srst license. EULA should be in NOT
ACCEPTED state.


Step 2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.


Step 3 license accept end user agreement
Example:
Router(config)# license accept end user
agreement
Configures a one-time acceptance of the EULA for cme-srst
license.
Accepts EULA by typing YES.

Step 4 exit
Example:
Router(config)# exit
Exits global configuration mode.


Step 5 show license detail cme-srst
Example:
Router# show license detail cme-srs
Displays the available cme-srst license. EULA should be in
ACCEPTED state.


Step 6 write mem
Example:
Router# write mem
Saves configuration.
Command or Action

This is explained in more detail starting on Page 15;

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.pdf

Cheers!

Rob

431
Views
0
Helpful
1
Replies