Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

LMR - 1-way transmission

We have 2 Adtran TA1500 shelves connected back-2-back via T1 thru 2 Cisco 3945 ISR's.

I can send a 1khz test tone from an E&M card on shelf A to B...no problem.

But when I try to send the tone in the opposite direction (i.e. shelf B to A) the test tone will not appear on the corresponding E&M card on shelf A.

The Adtran E&M cards are configured for 4-wire type 2 operation and the signalling works fine in both directions.

Let me know if you need more information as to why I can only get the test tone thru in one direction.

David

Everyone's tags (5)
241
Views
0
Helpful
0
Replies
CreatePlease to create content