I am currently running CME V 12.4(11)XW7 on a UC 500 and keep having random phones drop into the logged out of hunt group state. The Hlog key is disabled. Everything is working as expected apart from this and it is ver frustrating. I have to restart the phone system to clear it. The problem is happening at least once a week. Even deleting the ephone in question and rebuilding it does not clear the problem.
Assign a standard softkey template containing the HLog softkey to phones, and use the radio button available on the directory number configuration page that administrator can use to log in or out a phone from a hunt group.
HLog softkey and its corresponding radio button should be operational only for phones that are part of hunt list.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...