No, but if you are adding phones with users via BAT you can include that as part of the import. If you are building them individually then you have to do this manually, or still use BAT, but that would defeat the purpose if you are doing one at a time.
If you are LDAP integrated you do not add the users in CUCM you simply provision them, one of the provisioning items is the user groups. As explained before in order to gain access to ccmuser page the user needs to be associated with the End user group. Even with LDAP integrated deployment you can use BAT to set some of the parameters which may help when doing in in bulk.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...