I've got a route pattern 1.04XXXXXXX which whenever a call uses this pattern it drops the 1. The discard digits choice is <None>
I have no idea where my 1 is going. It is set up just the same as one that keeps the 1. It did have the discard predot when I first put it in, but I have deleted the pattern and re-added it without ever turning on the discard predot. Could it still be 'remembering' and dropping the 1 because of that?
anyway, at a loss for ideas, so anything is appriciated.
Thanks in advance,
Here is the dialed number analyzer:
Results Summary Calling Party Information Calling Party = 7418 Partition = Device CSS = Line CSS = International_HM AAR Group Name = AARCSS = Dialed Digits = 1041234567 Match Result = RouteThisPattern Matched Pattern Information Pattern = 1.04XXXXXXX Partition = National_HM Time Schedule = Called Party Number = 041234567 Time Zone = (GMT+12:00) Wellington, Auckland End Device = RL_HM Call Classification = OffNet InterDigit Timeout = NO Allow Device Override = Disabled Outside Dial Tone = NO Call Flow Route Pattern :Pattern= 1.04XXXXXXX Positional Match List = 041234567 DialPlan = North American Numbering Plan Route Filter Filter Name = Filter Clause = Require Forced Authorization Code = No Authorization Level = 0 Require Client Matter Code = No Call Classification = OffNet PreTransform Calling Party Number = 7418 PreTransform Called Party Number = 1041234567 Calling Party Transformations External Phone Number Mask = YES Calling Party Mask = Prefix = CallingLineId Presentation = Default CallingName Presentation = Default Calling Party Number = 7418 ConnectedParty Transformations ConnectedLineId Presentation = Default ConnectedName Presentation = Default Called Party Transformations Called Party Mask = Discard Digits Instruction = Prefix = Called Number = 041234567 Route List :Route List Name= RL_HM RouteGroup :RouteGroup Name= RG_HM PreTransform Calling Party Number = 7418 PreTransform Called Party Number = 1041234567 Calling Party Transformations External Phone Number Mask = On Calling Party Mask = Prefix = Calling Party Number = 7418 Called Party Transformations Called Party Mask = Discard Digits Instructions = Prefix = Called Number = 1041234567 Device :Type= H323Gateway End Device Name = 10.15.10.250 PortNumber = 0 Device Status = Unknown AAR Group Name = AAR Calling Search Space = AAR Prefix Digits = Inbound Fast Start = Disabled Outbound Fast Start = Disabled Call Classification = OffNet Tunneled Protocol = None Calling Party Transformations PreTransform Calling Party Number = 7418 Calling Party Selection = Originator Calling Party Presentation = Allowed CallerID DN = Calling Party Number = 7418 Alternate Matches Note: Information Not Available
I couldn't see anything that would do it, but details below:
Route List details:
Calling Party Transformations Use Calling Party's External Phone Number Mask - On Calling Party Transform Mask Prefix Digits (Outgoing Calls)
Called Party Transformations Discard Digits < None > Called Party Transform Mask Prefix Digits (Outgoing Calls )
Device Pool* Call Classification* Media Resource Group List Location AAR Group < None > Tunneled Protocol < None > Signaling Port* 1720 Media Termination Point Required Retry Video Call as Audio Wait for Far End H.245 Terminal Capability Set Path Replacement Support
Multilevel Precendence and Preemption (MLPP) Information MLPP Domain (e.g., "0000FF") MLPP Indication Not available on this device MLPP Preemption Not available on this device
Call Routing Information Inbound Calls Significant Digits* 7 Calling Search Space AAR Calling Search Space < None >
Outbound Calls Calling Party Selection* Calling Party Presentation* Called party IE number type unknown* Calling party IE number type unknown* Called Numbering Plan* Calling Numbering Plan* Caller ID DN Display IE Delivery Redirecting Number IE Delivery - Outbound Enable Outbound FastStart
Yes there was, when I first put the route pattern in, it had discard predot. I set discard to None and it still dropped it. So I deleted and recreated the route pattern and it still dropped it. I will give the box a restart tonight and let you know if that makes any difference.
Edit: I have been doing test calls, not just the number analyzer.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...