Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Losing the CUCM

We have on several occasions lost power or network connectivity to a Gateway. Once power/network is restored, We did not reconnect with CUCM. We have to go into the gateway and type “no MGCP”, then MGCP.  At that point connections are complete. We have had this thru several different IOS Codes and ever since Call Manager 3.1.  We are now up to CUCM 8.6.  Any suggestions?

 

CSCtf46011 does not apply. As the Gzteway is Down, untill the No MGCP ...MGCP command is given.

7 REPLIES
Cisco Employee

Hi Pharden,Do you mean that

Hi Pharden,

Do you mean that the gateway is in the Unregistered state even after the power comes back?

What is the gateway model and IOS version that you are using?

I'd suggest taking a look at CSCtf46011.

 

Hantale

Sree

New Member

Yes, the voice gateway is

Yes, the voice gateway is down. Until you telnet in and do a No Mgcp.. then an MGCP

Cisco Employee

Please upgrade to 15.1(4)M8.

Please upgrade to 15.1(4)M8. This has the fix. What's the model of the gateway?

New Member

Gateways mostly 2921 and 2821

Gateways mostly 2921 and 2821. some 3845. We are using advance enterprise 12.4.20.YAB, which was recommended by TAC. but did not help.

15.1(4)M8 you say.... I will give it a try.

 

Thanks

PHillip

New Member

hope this may help you. Bug

 

I think its a bug,

 

please find the link below along with the suggested resolution

 

 

https://tools.cisco.com/bugsearch/bug/CSCtf46011

 

Hope this help.

 

please rate,

 

thanks

Dennis

New Member

Yes, i reviewed this BUG.

Yes, i reviewed this BUG. Except the gateway Voice is down Hard.  Untill you telenet in and perform the "No MGCP"  .. Then MGCP

Thanks

New Member

That is one of the issues

That is one of the issues that I have experienced with MGCP. I would suggest moving to H.323 or SIP if possible. Then you will not have to deal with MGCP problems like this.

Just my thoughts.

Please rate if this helps.

Thanks!

116
Views
0
Helpful
7
Replies