Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Loudspeaker system Interaction with IP Phones

Hi All
We have an operational CUCM 7.0.2 Cluster  installation which covers  four physical sites.
Three of this sites are Warehouses with Loudspeaker Systems for announcments.
We need to connect an IP Phone operating in auto answer mode with each Loudspeaker system and be able to make announcments.
One solution was to use 7970 ip phone which supports external speaker and connect it to an input connector in the Loudspeaker. CP7970 are now end-of-sale and i can't find a phone with external speaker jack.
Any suggestions or solutions are welcome.

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Loudspeaker system Interaction with IP Phones

The 8900 and 9900 series phones do provide an external audio (speaker and microphone) port; however, this would be an unusual way of going about this. It is far more common to use an analog paging gateway from companies such as CyberData or Valcom. Multiple options exist depending on what the speaker amplifier will accept as an input.

2 REPLIES
VIP Super Bronze

Re: Loudspeaker system Interaction with IP Phones

The 8900 and 9900 series phones do provide an external audio (speaker and microphone) port; however, this would be an unusual way of going about this. It is far more common to use an analog paging gateway from companies such as CyberData or Valcom. Multiple options exist depending on what the speaker amplifier will accept as an input.

New Member

Re: Loudspeaker system Interaction with IP Phones

Hi Jonathan

Thanks for the info

496
Views
0
Helpful
2
Replies
CreatePlease to create content