09-04-2008 02:45 AM - edited 03-15-2019 01:02 PM
Hi, anyone who can give me a Export txt file for adding VG224 DN or how to BAT this goal.
I have add 10 VG224 into CCM (5.1), now I need to add some DN on VG224 through BAT, but i always failed though I have tried many way .
Could u pls give me some help? or share me the TXT.
Urgent!!!
Solved! Go to Solution.
09-08-2008 07:44 AM
Only thing to do avoid doing it all manually is to upgrade to 6. Make sure you go to 6.1.2 though, as there are a number of annoying bugs with VG224/BAT in 6.1.1
Cheers,
Alistair
09-04-2008 04:26 AM
i think its suported on V6 not 5 !
09-04-2008 04:30 AM
I don't believe the BAT import of VG224 DN's is supported on 5 or 6 to be honest (248's are), it sounds like it's going to be a painfully slow manual process.
09-04-2008 04:30 AM
Hi Zhang,
Marwan is most correct (nice!)+ 5 points for this Marwan :)
This is not supported in "older" CCM Versions;
CSCeg88823
Symptom:
BAT does not support adding VG224 ports in bulk
Conditions:
This is for all versions of BAT and all current version of Callmanager 3.x, 4.x, 5.x
It is now supported in CCM 6.x
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_0_1/t08gwins.html#wp1345635
Hope this helps!
Rob
09-04-2008 04:34 AM
thanks rob :) and 5 from me for the detailed info as well
09-04-2008 04:42 AM
Thanks all, each one 5 points.
My god, how can i handle this so many fax manually??????
09-08-2008 07:44 AM
Only thing to do avoid doing it all manually is to upgrade to 6. Make sure you go to 6.1.2 though, as there are a number of annoying bugs with VG224/BAT in 6.1.1
Cheers,
Alistair
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: