Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

<Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi, anyone who can give me a Export txt file for adding VG224 DN or how to BAT this goal.

I have add 10 VG224 into CCM (5.1), now I need to add some DN on VG224 through BAT, but i always failed though I have tried many way .

Could u pls give me some help? or share me the TXT.

Urgent!!!

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Only thing to do avoid doing it all manually is to upgrade to 6. Make sure you go to 6.1.2 though, as there are a number of annoying bugs with VG224/BAT in 6.1.1

Cheers,

Alistair

6 REPLIES

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

i think its suported on V6 not 5 !

New Member

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I don't believe the BAT import of VG224 DN's is supported on 5 or 6 to be honest (248's are), it sounds like it's going to be a painfully slow manual process.

Hall of Fame Super Red

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Zhang,

Marwan is most correct (nice!)+ 5 points for this Marwan :)

This is not supported in "older" CCM Versions;

CSCeg88823

Symptom:

BAT does not support adding VG224 ports in bulk

Conditions:

This is for all versions of BAT and all current version of Callmanager 3.x, 4.x, 5.x

It is now supported in CCM 6.x

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_0_1/t08gwins.html#wp1345635

Hope this helps!

Rob

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

thanks rob :) and 5 from me for the detailed info as well

New Member

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Thanks all, each one 5 points.

My god, how can i handle this so many fax manually??????

New Member

Re: <Urgent> BAT VG224 DN issue !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Only thing to do avoid doing it all manually is to upgrade to 6. Make sure you go to 6.1.2 though, as there are a number of annoying bugs with VG224/BAT in 6.1.1

Cheers,

Alistair

226
Views
25
Helpful
6
Replies