Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Lync extension - SIP/2.0 404 Not Found message

Hi voice team, i have a problem when i calling from my lync extension to specified number.

Attached are the logs - Work logs and Dont Work logs

On Work log i calling from my lync extension +554733729072 to a local number 099231238 and its work.

But when i calling from my lync extension to a long distance number 0011999407976 dont work.

But cisco extension can called to the long distance number normally, only lync extensions cant called.

On dont work log apears the message SIP/2.0 404 Not Found Reason: Q.850;cause=1

Thanks,

Thiago

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Lync extension - SIP/2.0 404 Not Found message

The string you posted is 13 digits, why not have it set to All?

Chris

8 REPLIES
Hall of Fame Super Silver

Lync extension - SIP/2.0 404 Not Found message

What does this have to do with Cisco?  This is Cisco forum, perhaps you should post your question to MSFT forum.

If there is a Cisco component involved here, please describe the topology and call flow.

HTH,

Chris

New Member

Lync extension - SIP/2.0 404 Not Found message

Hi, i have a CUCM 8.6 with a SIP trunk to Lync server.

On CUCM i have a lot of route patterns (local calls, Long Distance, International).

Lync extension +554733729072 make a long distance call, arrives at CUCM but doesnt match with route pattern, on cucm log appears the SIP/2.0 404 Not Found Reason: Q.850;cause=1

But when the lync extension make a local call the call is complete.

Thanks,

Hall of Fame Super Silver

Lync extension - SIP/2.0 404 Not Found message

Do you have a matching route pattern for this route in appropriate partition accessible from the CSS assigned to Lync SIP Trunk?

Have you looked at the Dialed Number Analyzer?

Chris

New Member

Lync extension - SIP/2.0 404 Not Found message

Yes i have a matching route pattern 0.0119[6-9]XXXXXXX.

When i analize the Dialed Number Analyzer appears this message: Match Result = BlockThisPattern

Hall of Fame Super Silver

Lync extension - SIP/2.0 404 Not Found message

Block means it is blocked, so your config is missing something.

On the SIP trunk how many significant digits is it set to?

Does the CSS have access to the partition that is assigned to the route pattern?

Chris

New Member

Lync extension - SIP/2.0 404 Not Found message

Significant digits is set to 12. The CSS had access to partition.

Hall of Fame Super Silver

Lync extension - SIP/2.0 404 Not Found message

The string you posted is 13 digits, why not have it set to All?

Chris

New Member

Lync extension - SIP/2.0 404 Not Found message

Hi Cris, i dont know why because I did not setup the sip trunk, but i set to "all" and its working normally.

Thanks for your support.

1379
Views
0
Helpful
8
Replies