Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Makeing an expensive Intercom system

I was wondering if anyone could solve my problem. Im currently trying to set a group of 9 Cisco ip phones 7940 to an network to where they will be able to call within the group but have no outside lines. The phones in question are all several miles apart. My companys client just want to communicat with another phone on their network in case of an emergency but have no access to outside lines. I know this is probley a simple task for most and ive tryed looking online for any information but to no avil. Im new to ip phones and have no knowlege on them, if anyone could direct me to a guide on how to do this i would be very thankful.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Makeing an expensive Intercom system

I'm assuming you'll use CUCM, all you need are partitions and CSS

Calling Privileges in Unified CM

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1044276

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Makeing an expensive Intercom system

I'm assuming you'll use CUCM, all you need are partitions and CSS

Calling Privileges in Unified CM

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/dialplan.html#wp1044276

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
149
Views
0
Helpful
1
Replies
CreatePlease to create content