Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Making a 3845 into a voice gateway

Hello,

I'm looking to build a lab voice gateway for my office.  We have a spare 3845 available (running adv security), but it wasn't configured for voice.  We have a voice PRI T1 from our vendor we can use (10 channels).  And I'll run CUCM 10.x on my existing VMware server.  I have some misc 79xx phones (20 phones).  G711, No SRST.

 

So basically I just need to know what I need to upgrade this 3845.  I think just a T1 card and DSPs?  And maybe the voice software license?  So far I'm thinking: NM-1CE1T1-PRI and PVDM2-16.  But I wasn't sure what voice/ios licenses I would need?

 

Thanks!

Bill

 

  • IP Telephony
4 REPLIES
VIP Purple

Hi Bill, You need to have

Hi Bill,

 

You need to have Voice image which I suppose would support in your case for Advance Security image.

 

can u share complete image name or u can also run feature navigator 

http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

regds,

aman

New Member

Currently running c3845

Currently running c3845-advsecurityk9-mz.124-25f.bin

VIP Purple

I checked Feature list and

I checked Feature list and says Voice is supported on 12.4

 

 

 

regds,

aman

New Member

Excellent, thank you, +5 So

Excellent, thank you, +5

 

So just the hardware I mentioned above and I'll be all set?

49
Views
5
Helpful
4
Replies