Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

making IP phone a reciever (incoming calls only)

Hello all,

Please is it possible to make some particular sets of IP telephone not able to make any outgoing calls but allow incoming calls only?

I use CUCM 6.0 and i dont seem to get where i can enable this feature on the CUCM, can anyone put me thru on this?

Pleaseeeeeeeeeeeee i need help as  soon as possible.

2 ACCEPTED SOLUTIONS

Accepted Solutions

making IP phone a reciever (incoming calls only)

don't assign any CSS to those devices & their DNs.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/a03ptcss.html

//Suresh Please rate all the useful posts.
VIP Purple

making IP phone a reciever (incoming calls only)

Hi Dupe,

you can refer the DOC for PArtition and CSS

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094b53.shtml

regds,

aman

4 REPLIES

making IP phone a reciever (incoming calls only)

don't assign any CSS to those devices & their DNs.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmsys/a03ptcss.html

//Suresh Please rate all the useful posts.
New Member

making IP phone a reciever (incoming calls only)

Thanks so much man! .....I'm so grateful, it worked!

VIP Purple

making IP phone a reciever (incoming calls only)

Hi Dupe,

you can refer the DOC for PArtition and CSS

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094b53.shtml

regds,

aman

New Member

making IP phone a reciever (incoming calls only)

Thanks so much man! .....I'm so grateful, it worked!

132
Views
0
Helpful
4
Replies
CreatePlease to create content