Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Manipulate inbound callerid

Howdy,

Is it possible to add a zero prefix to the callerid on an inbound call to a 5300 gateway?

Telco wont add it so we need to.

Any thoughts?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Manipulate inbound callerid

but you need to modify the inbound calls, so why did you configured an outbound calling number?

translation rules can certainly do this but you need to configure this in the right direction

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

Re: Manipulate inbound callerid

yes, look at this doc:

Add Prefix to the Missed Call Number

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805b6f33.shtml

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Manipulate inbound callerid

Unfortunately we arent using a call manager but a softswitch to terminate these calls.

I've tried putting the translate-outbound calling number translation rule on the voip peer but it still doesnt change the ani.

Any other ideas?

Cisco Employee

Re: Manipulate inbound callerid

but you need to modify the inbound calls, so why did you configured an outbound calling number?

translation rules can certainly do this but you need to configure this in the right direction

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Manipulate inbound callerid

Thanks had it pointing the wrong way. Changed and now working.

Many thanks

211
Views
0
Helpful
4
Replies
CreatePlease to create content