Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways


Hello all,

I have two 2911 Gateways that will be deployed for a new site. The gateways are both registered as MGCP gateways. The client has requested that outgoing calls from the site go through 1 gateway, and incoming calls to the site go through another. Does anyone know how to accomplish this?

Thanks,

neocec

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

Configure both GWs in CUCM but just configure one of them with a route group and route list for the route patterns for outbound calls.

Making sure that all the calls arrive in the other GW is something you need to discuss with your telco so they map your DIDs to that trunk.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
5 REPLIES
Hall of Fame Super Gold

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

Are you you at least familiar (evidently you are not certified) with CM configuration ?

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

You know, suggesting that I am not certified first off is not helpful, and downright insulting. If you don't have anything positive to post, don't post anything at all.

Hall of Fame Super Gold

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

Wow., touched a weak point or something ?

Good luck, with such an attitude, you will need a lot.

Cisco Employee

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

Configure both GWs in CUCM but just configure one of them with a route group and route list for the route patterns for outbound calls.

Making sure that all the calls arrive in the other GW is something you need to discuss with your telco so they map your DIDs to that trunk.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Manipulate Incoming and Outgoing Calls: MGCP PRI Gateways

Thank you javalenc. Now that was a helpful post! Unlike others in this thread.

Thanks a bunch,

neocec

259
Views
1
Helpful
5
Replies
CreatePlease login to create content