Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Manually adding new Cisco ATA 187 steps required

I am using CUCM 7.1.5 and want to Manually add new Cisco ATA 187 for FAX but i do not find Phone Type ATA187 in the list but i can see ATA 186 please can anybody tell that i need to use any phone type model ex 7960/7965 as ATA 187 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Manually adding new Cisco ATA 187 steps required

CUCM 7.1.5 supports ATA 187 for sure. Appending details from ATA 187 datasheet below..

Cisco UCM Version Compatibility

• Cisco UCM Versions 7.1.5, 8.0.2, or higher

To enable the device type in CUCM, you need to install the device enabler first on the CUCM & then install the latest firmware released on CCO Download page. Find both files here http://www.cisco.com/cisco/software/release.html?mdfid=283118514&flowid=16101&softwareid=282074215&release=9.2(1)&rellifecycle=&relind=AVAILABLE&reltype=all

cmterm-ata187-qed.9-2-1-0.cop.sgn : is the Device enabler file

cmterm-ata187.9-2-1-0.cop.sgn : firmware for ATA 187

Pls rate the post if it helps.


GP.

1 REPLY
Cisco Employee

Manually adding new Cisco ATA 187 steps required

CUCM 7.1.5 supports ATA 187 for sure. Appending details from ATA 187 datasheet below..

Cisco UCM Version Compatibility

• Cisco UCM Versions 7.1.5, 8.0.2, or higher

To enable the device type in CUCM, you need to install the device enabler first on the CUCM & then install the latest firmware released on CCO Download page. Find both files here http://www.cisco.com/cisco/software/release.html?mdfid=283118514&flowid=16101&softwareid=282074215&release=9.2(1)&rellifecycle=&relind=AVAILABLE&reltype=all

cmterm-ata187-qed.9-2-1-0.cop.sgn : is the Device enabler file

cmterm-ata187.9-2-1-0.cop.sgn : firmware for ATA 187

Pls rate the post if it helps.


GP.

563
Views
0
Helpful
1
Replies