Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

mapping outbound calls to specific bri port

Hi,

I have CCME 4.2, router 2811, IOS 12.4(11)XW3

And I have requirement as follows.

One group of IP phones should make outbound calls through one bri port, and another group through second bri port.

I try this solution: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml and don't work, I can't dial outside (with 9).

I also try this: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml with same result.

My config is in attachment.

Anybody have some idea?

Thanks in advance

AJ

169
Views
0
Helpful
0
Replies
CreatePlease to create content