Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

max dns for 7961g-ge - cucm 6.1.3

i have configured 2 dns on 7961 but its is not allowing me to do so .. i want one more number to be configured on the same phone .. can any one tell me how can i achive this .. configuring more than 2 extensions on 7961

and what is the max dns we can configure on 7941 & 7975 please reply asap

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: max dns for 7961g-ge - cucm 6.1.3

The 7961 can have up to 6 lines, the 7941 2 lines, and the 7975 8 lines.  To get more than the standard phone button template of 2 DN's per phone.  Go to Device > Device Settings > Phone Button Template.  Copy one of the phone button templates and give the new one a name then configure more DN's on the template.  Lastly apply the newly created template to the phone from the phone configuration page (Device > Phone).  You'll then see more configurable lines on the phone.

1 REPLY
Cisco Employee

Re: max dns for 7961g-ge - cucm 6.1.3

The 7961 can have up to 6 lines, the 7941 2 lines, and the 7975 8 lines.  To get more than the standard phone button template of 2 DN's per phone.  Go to Device > Device Settings > Phone Button Template.  Copy one of the phone button templates and give the new one a name then configure more DN's on the template.  Lastly apply the newly created template to the phone from the phone configuration page (Device > Phone).  You'll then see more configurable lines on the phone.

179
Views
0
Helpful
1
Replies