Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Max. no of Suported IP phone

Dear all,

I have Cisco 2811 with CME 12.T version, the present setup have max. no of IP Phone support is 48, If i want to add more phone what additional license/card or module i need to purchase?

This Box will support more phones or not, i want to know.

Thanks

AK

4 REPLIES
New Member

Re: Max. no of Suported IP phone

AK,

2811 supports max of:

36 SCCP Phones

144 Ephone-DNs

CME is not a so bug free setup, so i recommend to follow the guidelines from the cisco site:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme402sp.htm

Hope it helped

Regards.

Met.

Hall of Fame Super Gold

Re: Max. no of Suported IP phone

Actually a 2811 should support only 36 phones, and will not support more than that (actually a bit more, type ? after max-ephones).

There are no licenses that you can buy to increase that number.

As a workaround you can configure additional phones in SIP, but I would NOT recommend that and you should buy a bigger router instead.

Hope this helps, please rate post if it does!

New Member

Re: Max. no of Suported IP phone

Wat about Cisco 2821 (revision 53.51) with 249856K/12288K bytes of memory.

Is it restricted to 48 IP phones ?

thanks

Aman

Hall of Fame Super Gold

Re: Max. no of Suported IP phone

Actually 52, because Cisco allow form some excess from the marketed numbers.

430
Views
4
Helpful
4
Replies
CreatePlease to create content