Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

max# of ip-phones supported on CME

Hi,

Some documents say that Cisco 3825 running CME supports 168 ip-phones for maximum.

Is 3825 running CME supported when 168 ip-phones regists into the 3825 and every ip-phone has two or three DNs?

Is there any restriction about number of DNs for CME?

3 REPLIES

Re: max# of ip-phones supported on CME

There are certainly restrictions for the number of DNs supported on your platform.

Take a look at the document at the following link:-

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme403sp.htm

The document states that the 3825 supports 500 ephone-dns which should be sufficient for requirements.

Alternatively, another way of checking is form under the Telephony Service, run the command 'max-dn ?' or 'max-ephones ?', these will also show the maximum.

Hope this helps

Regards

Allan.

New Member

Re: max# of ip-phones supported on CME

Allan,

Thank you for your advice.

Best regards,

Tetsuo

Re: max# of ip-phones supported on CME

Hi Tetsuo, no problem all part of the service, thank you for the rating.

Best regards

Allan.

Best Regards

Allan.

726
Views
5
Helpful
3
Replies
CreatePlease to create content