Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Maximum MTP sessions in a CCM

I have a SIP TRUNK from a CCM (mcs-7845) to a SIP Server, with the "Media Termination Point required" box checked. Question: How many sessions will this server support at a given moment?

Thanks in advance,

Juan Salgado

4 REPLIES

Re: Maximum MTP sessions in a CCM

Hi friend,

You can read about MTP from the SRND documents for CCM.

Check this out:

SRND for 6.X:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/media.html

SRND for 4.X:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42media.html

Regards,

- Adrián.

New Member

Re: Maximum MTP sessions in a CCM

Under CUCM / System / Service Parameters / Media Streaming App, you can configure the "Call Count" for MTP. I think the suggested value is 48 for all platforms.

-steve

Cisco Employee

Re: Maximum MTP sessions in a CCM

the information is here:

Media Termination Points

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_2_3/ccmsys/a05mtp.html

A single MTP provides a default of 48 MTP (user configurable) resources, depending on the speed of the network and the network interface card (NIC). For example, a 100-MB Network/NIC card can support 48 MTP resources, while a 10-MB NIC card cannot.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Maximum MTP sessions in a CCM

Hi friends,

Nice info Jaime. 5 to you from me =)

Regards,

- Adrián.

483
Views
5
Helpful
4
Replies
CreatePlease to create content