Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Maxing out a 2911 G2 with vic cards

Hello Folks

I was wondering if anyone can answer the following;

I need to use lots of FXS-E vics on 2911 gen2 routers.

Now I can populate the 4 EHWIC slots giving me 8 ports. Next I thought I could use an NM-HD-2V to give me another two slots (I was under the wrong impression that Service module slots were backward compatible).

My voice colleague has come across the SM-NM-ADPTR which looks like a Service Module that can carry an old style network module - it certainly looks hopeful.

Could anyone advise if this is the case or, if not, the best way to get another 2 vic slots into that service module bay?

Many thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Maxing out a 2911 G2 with vic cards

Yes, you need the SM adapter in order to insert NM module into G2 ISR routers. The slot is basically wider and the adapter accommodates it.

HTH,

Chris

3 REPLIES
Hall of Fame Super Silver

Maxing out a 2911 G2 with vic cards

Yes, you need the SM adapter in order to insert NM module into G2 ISR routers. The slot is basically wider and the adapter accommodates it.

HTH,

Chris

New Member

Maxing out a 2911 G2 with vic cards

Cool.

Thanks for taking the time to answer my question.

Hall of Fame Super Red

Maxing out a 2911 G2 with vic cards

221
Views
0
Helpful
3
Replies
CreatePlease login to create content