Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MCS-7815-I1-CC2/IPC3 at 2,5Ghz instead of 3,06Ghz

Hello,

I've got a MCS-7815-I1-CC2/IPC3 IBM 306 Platform, boot at 2,5Ghz instead of 3,06Ghz.

I have CCM version 4.2.3 and I want to upgrade to 6.1 but verification hardware failed due to speed cpu.

- I have upgraded bios with last firmware from IBM : without success.

- I have open the cover to see if there are jumpers : no success.

- I want to change cpu setting on bios

(Advanced Processor Options) : impossible.

How to change theses settings ?

Best regards.

2 REPLIES
Green

Re: MCS-7815-I1-CC2/IPC3 at 2,5Ghz instead of 3,06Ghz

This sounds like a problem with the bus on the system board. I have seen replacing it resolve this issue before

New Member

Re: MCS-7815-I1-CC2/IPC3 at 2,5Ghz instead of 3,06Ghz

Thank You for you answer.

I just have another question : what is the original frequency of the RAM on this type of server? I've remarked that I've got PC2700 (DDR 333) on the server and I think that it sells with PC3200 (DDR 400) ?!

Can you confirm this ?

Thank you.

99
Views
0
Helpful
2
Replies