01-10-2012 09:56 PM - edited 03-16-2019 08:56 AM
Hi ,
I am facing problem with CUCM 7.1.3 , as it is not booting and throwing the below mentioned error message. I am attaching the error snap shot also.This model server is having only one HDD of 250 GB capacity.
Error Message-- "ext3-fs error (device/sd 6) in start-transaction journal has abborted".
Please let me know it there is any solution for this issue.
Thanks in advance.
Regards
Sankar.
Solved! Go to Solution.
01-10-2012 11:18 PM
Similar issue is handled already on this thread https://supportforums.cisco.com/thread/2083723 .
Always, do a casual search on this forum for the issues faced. Saves time.
GP.
01-10-2012 10:30 PM
Did you complete the manual file system check ( using recovery disk ) as shown in the snapshot ?
GP.
01-10-2012 10:42 PM
No. Can you share me the procedure.
01-10-2012 10:48 PM
If you observe the screenshot carefully, the procedure is very much provided in it. Reboot the system & follow the steps prompted to complete Manual File System Check ( FSCK ). Keep the recovery disk handy with you & insert in the driver whenever prompted & continue with next pr0mpted steps.
Refer the OS admin guide for your CUCM version available on CCO for any such activities.http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
If it appears difficult to perform, feel free to raise a TAC case with Cisco.
Pls rate the post if it helps.
GP.
01-10-2012 11:03 PM
IS the recovery disk and CUCM installation disk same?
01-10-2012 11:16 PM
No you need to download the Recovery software for your CUCM from CCO, here it is http://www.cisco.com/cisco/software/type.html?mdfid=282421166&catid=278875240&i=rp
Also refer the document http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b1f305.shtml
Pls rate the post if it helps.
GP.
01-10-2012 11:18 PM
Similar issue is handled already on this thread https://supportforums.cisco.com/thread/2083723 .
Always, do a casual search on this forum for the issues faced. Saves time.
GP.
01-12-2012 01:19 AM
Hi GP,
Thanks a ton. I resolved it by recovery DVD, which came from cisco.
Regards
Sankar.
01-12-2012 01:45 AM
NP Sankar, Glad I could assist.
Thanks for the nice ratings.
Cheers !!
GP.
04-23-2018 10:12 AM
Hi Gajanan,
We have MCS 7816-I4 with CUCM 7.1.3b and got the same issue. Pl find the attached photo.
The link provided above is no longer working. Great if you can help
04-23-2018 11:34 AM
If you mean the link for the recovery disk, right now your only chance would be your SE.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide