Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MCS7825-H3 RAM Memory upgrade

Hello experts,

We have some old MCS7825-H3 servers with 2GB RAM memory we need to upgrade to 4GB.

I was wondering if there is a particular way to perform the upgrade:

- Do we only need to power the server down and then install the modules?

- Is a particular slot assignation we need to take into consideration?

I can see that at this moment modules are installed in slots 1 and 3 (that's the original configuration).

Any suggestions or comments will be appreciated.

Thanks a lot!

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

MCS7825-H3 RAM Memory upgrade

Yes you just have to disconnect power, follow appropriate anti-ESD precuations, and install the memory.

The large sticker on the inside of the server's cover explains how memory should be installed.

http://h18004.www1.hp.com/products/quickspecs/12572_na/12572_na.html

2 REPLIES
VIP Super Bronze

MCS7825-H3 RAM Memory upgrade

Yes you just have to disconnect power, follow appropriate anti-ESD precuations, and install the memory.

The large sticker on the inside of the server's cover explains how memory should be installed.

http://h18004.www1.hp.com/products/quickspecs/12572_na/12572_na.html

New Member

MCS7825-H3 RAM Memory upgrade

Thanks a lot Jonathan!!

581
Views
0
Helpful
2
Replies
CreatePlease to create content