Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

MCU 3515 5.0.0.48 failure to register with CCM 4.1(3)

Hi Guys,

I am configuring IPVC 3515 5.0.0.48 to register using SCCP with Call Manager 4.1(3)

I created the VC bridge but I am enable to get the unit register on CCM. Any ideas how can I resolve this problem?

Many thanks for you help.

Wajih

1 REPLY
Community Member

Re: MCU 3515 5.0.0.48 failure to register with CCM 4.1(3)

Hi,

Thx anyway, i solved the problem bymyself!!

All i had to do is to renenter in the console mode on the EMP port, before the 6 sec passed i pressed "Enter"(i have already done this before to configure the IP @ of th EMP), i had to indicate to the EMP the IP @ of the MCU .

help it could help others

125
Views
0
Helpful
1
Replies
CreatePlease to create content