Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MCU 3515 Registration failed with callmanager

HI,

I have installed an MCU 3515 in order to use it for videoconference but it doesn't register with the callmanager!

I have configured the MCU with CLI, gave IP addresses for the two cards : MC and EMP,i configured the right masks,.. i have added the MCU in the callmanager as a video bridge. But in the callmanager the status of this bridge is "UNKNOWN" : it didn't register with the callmaner.

Please help me!!

2 REPLIES
New Member

Re: MCU 3515 Registration failed with callmanager

I solved the problem!

All i had to reconfigure the EMP port, by indicating the IP @ of the MCU, and the the MCU will be registered in the CallManager.

helps it could help.

New Member

Re: MCU 3515 Registration failed with callmanager

Hi Mohamed,

I have the same problem. Reconfigure EMP port and indicating IP address of MCU. Does it mean MCU and EMP ports' IP addresses should be same???

Thanking you in anticipation.

Regards,

Amit.

264
Views
0
Helpful
2
Replies